Description et caractéristiques
Switch Manageable
- 4 Ports Gigabit POE + 2 Ports SFP
- 1 port Hi-POE
- Transmission longue distance jusqu’à 300 m
- Alimentation solaire 12-24V/ 54V
- Protection surtension 6 kV
- Montage bureau, rail DIN ou mural
- Consommation max 120 W
Caractéristiques principales
- Type de switch : Switch manageable, Switch POE, Switch Hi-POE
- Nombre de ports du switch : 4 ports
- Budget POE max : 110 W
- Nombre de ports POE Switch : 4 ports POE
- Nombre de Ports Hi-POE : 1 port Hi-POE
Fiche technique
| Poids net | 0.7 kg (1.54 lb) |
|---|---|
| Poids brut | 1.16 kg (2.56 lb) |
| Dimensions (W × H × D) | 158.00 mm × 44.00 mm × 130.00 mm (6.22'' × 1.73'' × 5.12'') |
| Température de fonctionnement | -40 °C to 75 °C (-40 °F to 167 °F) |
| Température de stockage | -40 °C to 85 °C (-40 °F to 185 °F) |
| Humidité de fonctionnement | 5% to 95% (no condensation) |
| Relative Humidity | 5% to 95% (no condensation) |
| Alimentation | 12V DC, 10A or 24V DC, 5A; 54V 2.22A |
| Installation Mode | Desk-Mounted,Rail,Wall-Mounted |
| Max. Power Consumption | 120 W |
| Power Consumption in Idle | 2 W |
| Surge Protection | 6 kV |
| Shell | Metal material, IP30 |
| Ports | 4 × Gigabit PoE port,2 × Gigabit fiber optical port,1 x RS485 port |
| MAC Address Table | 2 K |
| Switching Capacity | Whole-Device Performance: 14 Gbps Port Performance: 12 Gbps |
| Packet Forwarding Rate | Whole-Device Performance: 10.42 Mpps Port Performance: 8.93 Mpps |
| Internal Cache | 1 Mbits |
| Long Range | Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
| Port Isolation | Ports 1 to 6: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| PoE Watchdog | Ports 1 to 4: auto detect and restart the cameras that do not respond. |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation group(s). |
| Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. Support G.8032 ERPS. |
| QoS | QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode. |
| VLAN | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN. |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
| DHCP Snooping | DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default. |
| DDM (Digital Diagnostic Monitoring) | Support real-time monitoring of key parameters in optical modules, such as operating temperature, operating voltage, operating current, and Rx and Tx optical power. |
| PoE Standard | Port 1: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Ports 2 to 4: IEEE 802.3af, IEEE 802.3at Ports 3 to 4: support passive PoE, 24 V or 54 V output depending on DIP switch settings |
| PoE Power Pin | Port 1: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) Port 2: End-span: 1/2(-), 3/6(+) Ports 3 to 4: 8-pin power: 1/2(-), 3/6(+), 54 V output ; 4/5(+), 7/8(-), 24 V output |
| PoE Port | Hi-PoE: Port 1 PoE: Ports 2 to 4 |
| Max. Port Power | Port 1: 90 W Ports 2 to 4: 30 W |
| PoE Power Budget | DC 54 V input: 110 W DC 12 V~24 V input: 60 W |
| EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015) |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
📄 Télécharger la fiche technique (PDF)
Référence fabricant : DS-3T1506HP-EI-UPS · Marque : Hikvision