Description et caractéristiques
Switch PoE Gigabit manageable 24 ports PoE + 2 ports RJ45 Gigabit + 2 ports SFP Gigabit
- Budget PoE 370 W
- VLAN 802.1Q
- STP/RSTP
- QoS
- SNMP
- DHCP Snooping
- PoE Watchdog
- Agrégation de liens
- Isolation de ports
- Longue portée PoE jusqu’à 300 m
- Protection surtension 6 kV
- Gestion cloud Hikvision
Caractéristiques principales
- Type de switch : Switch manageable, Switch Gigabit, Switch POE, Switch L2
- Nombre de ports du switch : 28 ports
- Budget POE max : 370 W
- Nombre de ports POE Switch : 24 ports POE
- Nombre de ports fibre : 2 ports fibre
Fiche technique
| Shell | Metal material |
|---|---|
| Poids net | 3.4 kg (7.5 lb) |
| Poids brut | 2.8 kg (6.2 lb) |
| Dimensions (W × H × D) | 440.0 mm × 44.0 mm × 220.8 mm (17.32'' × 1.73'' × 8.69'') |
| Température de fonctionnement | 0 °C to 45 °C (32 °F to 113 °F) |
| Température de stockage | -40 °C to 85 °C (-40 °F to 185 °F) |
| Humidité de fonctionnement | 5% to 95% (no condensation) |
| Relative Humidity | 5% to 95% (no condensation) |
| Alimentation | 100-240 VAC, 50/60 Hz, Max. 6.3 A |
| Max. Power Consumption | 400 W |
| Power Consumption in Idle | 20 W |
| Surge Protection | 6 kV |
| Installation Mode | Desk-Mounted,Rack (equipped with mounting ears) |
| Ports | 24 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port |
| MAC Address Table | 16 K |
| Switching Capacity | 68 Gbps |
| Packet Forwarding Rate | 50.59 Mpps |
| Internal Cache | 8.4 Mbits |
| Long Range | Ports 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
| Port Isolation | Ports 1 to 28: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| PoE Watchdog | Ports 1 to 24: Auto detect and restart the cameras that do not respond. |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation group(s). |
| QoS | QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP and WRR priority scheduling modes. Support DSCP-based QoS policy. |
| Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. |
| VLAN | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 1024 VLAN. |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. |
| DHCP Snooping | DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default. |
| DDM (Digital Diagnostic Monitoring) | Support real-time monitoring of key parameters in optical modules, such as operating temperature, operating voltage, operating current, and Rx and Tx optical power. |
| PoE Standard | IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin | End-span: 1/2(-), 3/6(+) |
| PoE Port | PoE: Ports 1 to 24 |
| Max. Port Power | 30 W |
| PoE Power Budget | 370 W |
| Perpetual PoE | Supported PoE remains active during system reboot, except in cases of power outage or PSE firmware upgrade. |
| EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety | UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017) |
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
📄 Télécharger la fiche technique (PDF)
Référence fabricant : DS-3E1528P-EI · Marque : Hikvision